It’s easy with your Wavlink AC1300 setup. Connecting the device to your modem or router and inserting it into an electrical outlet is the first step. Next, enter the default IP address listed in the user manual to access the Wavlink setup interface via a web browser. To adjust your network settings and set up a secure Wi-Fi network, follow the on-screen instructions. Once finished, you may enjoy high-speed internet access across your house or place of business by connecting your devices to the newly established network.
1. The WPS LED on the extender will flash after five seconds of pressing and holding the WPS button.
2. Press your router’s WPS button within two minutes.
3. Hold off until the extender’s WPS LED solidifies, indicating a successful connection.
4. Using the given credentials, join the extender’s WiFi network.
5. To finish the setup, use a web browser and adhere to the on-screen steps.
1. Wait for the Wavlink AC1300 extender to power up after connecting it.
2. Connect your device to the Wi-Fi network of the extender.
3. Enter “ap.setup” in the address bar of an open web browser.
4. Enter the default information, admin/admin, to log in.
5. To change the extender parameters, follow the on-screen instructions.
6. Reconnect to your main Wi-Fi network after setup to get more coverage.
Note: If you need any assistance regarding your Re.brostrend wifi Extender, get in touch with us via the chat button you see on the bottom right corner of this page.
1. Create a connection with the Wavlink AC1300 extender’s default Wi-Fi network.
2. Enter “ap.setup” in the address bar of an open web browser.
3. To access the setup interface, enter “admin” for both the password and username.
4. To change your extender’s settings, follow the on-screen instructions.
5. Customise the password and SSID for your network.
6. Reconnect your devices to the expanded Wi-Fi network after setting them up for better coverage.
1. Open the web interface of the extender.
2. Find the area that updates the firmware.
3. Go to the manufacturer’s website and download the most recent firmware.
4. To the extender, upload the firmware file.
5. For the update to finish, restart the extender.
1. You have to find the Wavlink AC1300’s reset button.
2. Press the reset button for 10 to 15 seconds.
3. As soon as the power LED begins to blink, release the reset button.
4. After the extender has restarted, change the settings as needed.