The MSRM US300 Extender setup is a compact and powerful Wi-Fi range extender designed to enhance and extend wireless network coverage. With its user-friendly setup and robust performance, the MSRM US300 is an effective solution for overcoming dead zones and improving connectivity in homes or small offices. Its sleek design and compatibility with various routers make it a convenient and reliable choice for those seeking to boost their Wi-Fi signal effortlessly.
1. Connect your computer or mobile device to the MSRM US300 WiFi extender network.
2. Open a web browser such as Chrome, Firefox, or Safari on the connected device.
3. Enter the default IP address of the MSRM US300 (commonly 192.168.10.1) in the browser’s address bar and press Enter.
4. Enter the default username and password (often ‘admin’ for both) to access the extender’s settings.
5. Follow the on-screen instructions to configure the WiFi extender settings. This typically involves selecting your existing WiFi network and entering the password.
6. Save the settings, and the extender will restart. Once the restart is complete, your MSRM US300 WiFi extender should be set up and ready to use.
7. Please note that specific details may vary, and it’s essential to refer to the product’s manual for accurate and detailed instructions.
1. Turn on the MSRM US300.
2. Confirm that it is in close proximity to the house’s router.
3. Then press the WPS button on your booster.
4. On your home router, press the same WPS button now.
5. When your repeater shows three consecutive green lights, it has probably been configured and set up.
6. You can unplug the repeater and put it anywhere you’d like.
Note:If you need any assistance regarding your MSRM US300 EXTENDER, get in touch with us via the chat button you see on the bottom right corner of this page.
1. Your extender has to be able to extend the distance between your router and the spot where you require internet connectivity.
2. Now look up the MSRM network name in your Wi-Fi list using your laptop or smartphone. It is possible to see the signal as Wireless-N Wireless-AC.
3. The MSRM may appear to you with no internet for up to ten seconds after you join to the network.
4. Open a new tab on the same computer, then type AP into the address box.
5. For the MSRM US300 extender setup to be finished, input OR 192.168.10.1.
6. Your username and password must be entered on the admin login screen that appears when you are sent there.
7. Click next to pick the repeated choice from the list of available possibilities.
1. Using a computer, tablet, or smartphone to connect to the WiFi network which your Coredy WiFi extender is producing.
2. In the device you have been connected to, open a web browser.
3. Type the IP address given in the Coredy book into the address case and press Enter.
4. To configure your Coredy WiFi extender, enter the default login credentials (which will usually be included in the book) and follow the instructions that appear on the screen.