A Victony AC1200 Wifi extender setup,that improves your wifi connection or wireless network, so you can play games, watch movies, and watch web series continuously. With the Victony WIFI Extender Setup’s 4 external antennas, you can be sure to have WiFi coverage that is unequalled across your homes and workplaces. Setting up a Victony extender is quite simple. It is a plug-and-play gadget that establishes a 15-second connection with any router. Victony’s AC1200 setup offers three operating modes—”Router/Repeater/AP”—that you can select based on your requirements. However, you must keep in mind that your Victony Extender must be reset or configured when you change the mode
1. You start by moving your router and Victony wireless extension into the same room.
2. Make that the extension receives at least 50% of the signals from your router.
3. Now turn on both your router and the extension.
4. If the LED light is stable or solid green, wait a few seconds and check.
5. Open the wifi settings on your laptop, desktop, or mobile device, then connect to the Victony ac1200 extender setup.
6. There is no need to input a password the first time because they will connect to your device as soon as possible.
7. They showed no internet connectivity after connecting before opening any web browser.
8. Type AP in the address bar at the top.You can type 192.168.10 or set up.There will only be one login window.
9. Type “admin” for both your username and password.
10. Enter your new extender setup password after choosing the extender you want to connect to your router with.
11. Reboot your extender for 15 to 20 seconds after setup, then turn it back on.
12. Use the Victony wifi range extender setup to connect your device; the name appears as “SSID_EXt” in your wifi list.
1. Start by connecting your extender and router using an Ethernet wire.
2. As soon as the LED light improves, wait.
3. Then, press and hold the WPS button for 5 seconds.
4. Both devices’ lights will begin to flicker, and after 15–20 seconds, they will stop, indicating a successful setup.
5. Now that your new extender has been removed, you can place it wherever you want using a range extender setup.
6. The password for the new extender setup is the same as the password for your router, and you will then see “SSID_EXT” in your wifi list.
Note: Don’t Let WiFi Troubles Slow You Down. Chat With Our Live Agents For Quick Help.
1. Connect your computer or mobile device to the WiFi network broadcasted by your Victony extender.
2. Open a web browser like Chrome, Firefox, or Safari.
3. In the browser’s address bar, type in the default IP address for Victony extenders (e.g., 192.168.0.1).
4. Enter the default username (usually “admin”) and password (often “admin” or blank). Once logged in, you’ll be in the extender’s settings interface.
5. Customize your extender settings as needed, such as WiFi network name and password.
Remember to change the default login credentials for security. If you can’t find the necessary info, consult your user manual or contact Victony support.
1. Ensure your computer or mobile device is connected to the Victony AC1200 extender’s WiFi network.
2. Launch a web browser (e.g., Chrome, Firefox, Safari).
3. Type the extender’s IP address into the browser’s address bar. The default IP address is typically “192.168.0.1” or “192.168.1.1.”
4. Log in using your extender’s username and password. Refer to the user manual for default credentials.
5. Navigate to the firmware update section. This is usually found in the extender’s settings or administration menu.
6. Look for an option to check for firmware updates. Click on it, and the extender will search for the latest firmware version.
7. If a new firmware version is available, download and install it. Follow on-screen instructions for this process.
1. Find the reset button on your Victony AC1200 extender.
2. Use a paperclip or similar tool to press and hold the reset button for about 10-15 seconds.
3. Release the reset button after the specified time.
4. Wait for the extender to reboot, which may take a minute.
5. Reconnect to the extender’s WiFi network and set it up again by accessing the configuration interface through a web browser.