The Coredy WiFi extender setup is easy to set up. The extender should first be put into a power plug near the present WiFi router. Keep out till the indicator lights equal out. Open a computer or smartphone to link to the extender’s usual WiFi network.. Start a web browser and enter the IP address or setup URL that is specified in the user handbook. To set up your extender, choose your current WiFi network and input the password by following the on-screen prompts. Upon completion, the Coredy E300 WiFi enhancer will strengthen and expand your wireless network, giving a more stable and strong connection over your home or place of company.
1. Plug In Your Coredy Extender: Locate a power outlet near your existing router and plug in your Coredy E300 WiFi extender.
2. Connect to Coredy’s WiFi: Using your smartphone or computer, connect to the default WiFi network emitted by the Coredy extender.
3. Access Setup Page and Follow Instructions: Open a web browser and enter the setup Ap Extender Setup or 192.168.10.1 address as provided in the manual. Follow the on-screen steps to select your existing WiFi network
1. Connect your Coredy WiFi extender to a power outlet near your existing router and wait for the indicator lights to stabilise.
2. Using your device (phone or computer), go to your WiFi settings and connect to the default network emitted by the Coredy extender.
3. Open a web browser and enter the provided IP address or setup URL from the manual. Follow the on-screen instructions to select your existing WiFi network and enter its password. Once completed, your Coredy WiFi extender is ready to boost your network signal.
Note:If you need any assistance regarding your Coredy wifi extender, get in touch with us via the chat button you see on the bottom right corner of this page.
1. Power On Your Coredy Extender: Plug in your Coredy WiFi extender and wait for the indicator lights to stabilise.
2. Press WPS Button on Your Router: Locate the WPS button on your existing WiFi router and press it.
3. Press WPS Button on Coredy Extender: Within 2 minutes, press the WPS button on your Coredy extender. Once the WPS LED on the extender turns solid, the setup is complete, and your Coredy extender is now extending your WiFi network.
1. Using a computer, tablet, or smartphone to connect to the WiFi network which your Coredy WiFi extender is producing.
2. In the device you have been connected to, open a web browser.
3. Type the IP address given in the Coredy book into the address case and press Enter.
4. To configure your Coredy WiFi extender, enter the default login credentials (which will usually be included in the book) and follow the instructions that appear on the screen.
1. Ensure the extender is powered on and connected to your computer or mobile device.
2. Open a web browser and enter the extender’s IP address (e.g., 192.168.0.1) in the address bar.
3. Enter the default username and password (usually “admin” for both).
4. Look for a “Firmware Update” or similar option in the web interface.
5. If needed, download the latest firmware from the official Coredy website.
6. Use the web interface to upload the downloaded firmware file.
7. Wait for the update to finish, and if not done automatically, restart the extender.
8. Your Coredy E300 WiFi range extender is now updated with the latest firmware.
1. Search at the Coredy WiFi extender’s reset button.
2. Press and hold the reset button for about ten seconds with a paperclip or similar item.
3. let Off of the Button and See for the Extender to Get Back Up. Now your Coredy WiFi network is back to usual.