Your MSRM US302 Extender Setup may be simple to configure. Just place your device into the power socket and use it to connect to the WiFi network. In the URL box of your browser, type “ap.setup” or “192.168.10.1” to reach the setup page. To configure the extender, follow the on-screen instructions, which include choosing your current WiFi network and providing the password. After it’s finished, use the MSRM US302 Extender to enjoy improved WiFi coverage and connectivity across your house or place of business.
1. This takes around 15 seconds and is the simplest. All you need to do is plug the extender into the router’s location first.
2. When the power LED on the repeater turns static, press the WPS button to make it appear like two arrows moving in a circle.
3. Now, after a minute or two, press the WPS button on the router to watch the blinking of the lights on both devices.
4. The WPS on the router will stop blinking and turn solid after successful configuration, while it will turn on the extender.
5. Go to your WiFi list and use the same password as a router to connect your devices to the newly created extender network.
1. Wait for the MSRM US302 Extender to turn on after connecting it.
2. Link your gadget to the extender’s WiFi network.
3. Open a web browser and navigate to either “ap.setup” or “192.168.10.1”.
4. To manually configure the extender, follow the instructions shown on the screen.
5. When you’re done with the setup, take advantage of increased WiFi coverage.
Note:If you need any assistance regarding your MSRM US302 EXTENDER, get in touch with us via the chat button you see on the bottom right corner of this page.
1. Connect to the WiFi network of the MSRM US302 Extender.
2. In the address box of an open web browser, write “ap.setup” or “192.168.10.1.”
3. Put in the password and username.
4. In order to access the extender’s settings, click “Login.”
5. Now that you’ve logged in, you may control your MSRM US302 Extender.
1. Use a browser to access the web interface of the MSRM US302 Extender.
2. Choose the firmware upgrade option from the settings menu.
3. Download the latest firmware from the manufacturer’s website.
4. Start the update by uploading the firmware file to the extender.
5. Wait for the update’s completion to guarantee improved security and performance.
1. Find the MSRM US302 Extender’s reset button.
2. Press and hold the reset button for ten seconds using a paperclip.
3. The moment the LED lights begin to flash, release the button.
4. Hold off until the extender reboots and returns to its original setup.
5. After the reset, set the extender as required.