The local web page re.rockspace.local setup your Rockspace wifi extender. Bad connectivity will be history once a Rockspace range extender is installed at your home or place of business. So if you want to install the Rockspace Wi-Fi range extender, keep reading. Here, we’ll give you easy-to-follow instructions so you can finish the re.rockspace.local setup process.
1. Your rockspace repeater should be opened and placed.
2. Connect your WiFi extender from Rockspace.
3. Go to your laptop or PC.
4. Check how close your rockspace extender is to the router.
5. Connect your device to the web.
6. Pick any web browser, such Chrome or Firefox.
7. Then register for Rockspace.
8. After that, do as the screen instructs.
Your Re.rockspace.local extender can be set up easily and quickly using WPS .A router function called WPS makes connecting wifi-enabled devices to a safe wireless network simpler.
1. Your rockspace extender needs to be linked to a power outlet.
2. Watch for the power light on your extender to go solid.
3. Next, press the WPS button on your rockspace extender for the first time.
4. Repeat the procedure on your router in 1-2 minutes.
5. The extender LEDs on both devices start to flash.
6. While setup, never switch off your WiFi extender.
7. It may take some time for your rockspace extender to connect to your home network.
Note: Don’t Let WiFi Troubles Slow You Down. Chat With Our Live Agents For Quick Help.
1. On your computer or mobile device, launch a browser.
2. In the address bar, type 192.168.0.254 or re.rockspace.local setup.
3. When you press enter, the login page will appear on your screen.
4. As your login information, type admin and your username.
5. You now have access to all the settings and functions of the re.rockspace.local interface.
This method of accessing re.rockspace.local setup is the safest. You may simply get in touch with our technical experts if you have any questions concerning your Rockspace wifi extender. They will answer your question and help you.
firmware updates are intended to boost your extender’s functionality. If your internet speed is low and you are experiencing buffering. If so, just carry out the firmware upgrade. Follow the directions below to get the most recent firmware for your extender in order to upgrade your Rockspace firmware.
1. To the extender, connect.
2. Start the web browser.
3. Please go to re.rockspace.local.
4. Enter your username and password to log in.
5. Firmware upgrade can be found in the menu.
6. Select the most recent firmware by going to the administration bar.
7. It will take two to three minutes to upgrade the firmware.
8. Make sure to keep the power on while you upgrade.
9. A reset of your Rockspace extender will follow.
If your repeater isn’t giving you full internet connectivity, if you’ve forgotten your username and password. Then, reset your Rockspace extender with a pointed pin, paper clip, or needle.
1. To turn on the extender, plug it into an outlet.
2. A solid blue light will then appear on your extender after that.
3. Through the reset hole, insert a pin.
4. Keep the pin in place for a minimum of 8 to 10 seconds.
5. From the reset hole, take the pin out.
6. Watch for the LED to turn solid blue after that.
7. Your Rockspace extender will then restart on its own after that.