wavlink wifi extender setup

Victony WiFi Extender Setup

The Victony WiFi Extender Setup is the best wireless range extender. It improves the speed at which you can upload, download, and play HD films online on your laptop or computer. It also makes your online activities safer, smoother, and faster. ViCTONY WIFI EXTENDER uses its 1200 MBPS speed to accomplish this.

Therefore, everything may be done on the spur of the moment, including downloading, gaming, and streaming videos. Additionally, VICTONY WIFI EXTENDER LOGIN has a ton of capabilities and is an excellent tool for solving all of your internet-related problems.

Victony WiFi Extender Setup

Victony AC1200 Extender Setup Manual Guide

Victony WiFi Extender Setup WPS Guide

  • Wait for the Victony AC1200 WiFi extender to turn on after plugging it in.
  • Link your device to the WiFi network of the extender.
  • ap.setup should appear in the address bar of any open web browser.
  • To finish the ap setup, follow the directions displayed on screen.
  • To extend your current WiFi network, choose it and type in the password.
  • After the extender has restarted, check the increased WiFi signal strength.


  • Wait for the Victony WiFi extender to turn on after plugging it in.
  • Press the WPS button.
  • Await for the extender’s WPS LED to solidify and cease blinking.
  • If necessary, move the extender to improve coverage.
  • Right now, your Victony WiFi extender is configured using WPS.


Note: If you need any assistance regarding your victony wifi range extender, get in touch with us via the chat button you see on the bottom right corner of this page.

Victony WiFi Range Extender-Login Steps

  • Establish a WiFi connection with the Victony extender.
  • Enter ap.setup in the URL bar of an open internet browser.
  • Type in the standard login credentials, which are typically admin.
  • To get to the setup interface, click Login.
  • Adjust the extender’s settings as required.
  • After making changes, log out.


Victony WiFi Range Extender-Firmware Update

Victony WiFi Range Extender-Firmware Update
  • Go to the Victony website and get your extender’s most recent firmware.
  • Open a web browser and go to the extender’s setup interface.
  • Go to the area for firmware updates.
  • To upgrade, upload the downloaded firmware file and follow the on-screen instructions.
  • When the update is finished, wait and, if needed, restart the extender.
  • The most recent firmware has been updated for your Victony extender.


Victony WiFi Extender-Reset Process

  • Find your Victony WiFi extender’s reset button.
  • Hold the reset button for 10 to 15 seconds.
  • When the extender’s LED lights begin to blink, release the reset button.
  • Await the reboot and factory reset of the extender.
  • Adjust the settings of your extender as necessary.
  • The reset of your Victony WiFi extender has been completed.