Victony AC1200 Wifi Extender Setup

A Victony AC1200 Wifi extender setup,that improves your wifi connection or wireless network, so you can play games, watch movies, and watch web series continuously. With the Victony WIFI Extender Setup’s 4 external antennas, you can be sure to have WiFi coverage that is unequalled across your homes and workplaces. Setting up a Victony extender is quite simple. It is a plug-and-play gadget that establishes a 15-second connection with any router. Victony’s AC1200 setup offers three operating modes—”Router/Repeater/AP”—that you can select based on your requirements. However, you must keep in mind that your Victony Extender must be reset or configured when you change the mode

Victony AC1200 extender Setup via web browser

Victony AC1200 Setup on the web browser can be completed by following the instructions listed below:

You start by moving your router and Victony wireless extension into the same room.
Make that the extension receives at least 50% of the signals from your router.
Now turn on both your router and the extension.
If the LED light is stable or solid green, wait a few seconds and check.
Open the wifi settings on your laptop, desktop, or mobile device, then connect to the Victony ac1200 extender setup.
There is no need to input a password the first time because they will connect to your device as soon as possible.
They showed no internet connectivity after connecting before opening any web browser.
Type AP in the address bar at the top.You can type 192.168.10 or set up.There will only be one login window.
Type “admin” for both your username and password.
Enter your new extender setup password after choosing the extender you want to connect to your router with.
Reboot your extender for 15 to 20 seconds after setup, then turn it back on.
Use the Victony wifi range extender setup to connect your device; the name appears as “SSID_EXt” in your wifi list.

Don’t Let WiFi Troubles Slow You Down. Chat With Our Live Agents For Quick Help.

Victony AC1200 extender Setup via wps method

Use the WPS button to setup your WiFi range extender via the Ap.setup To set up your victony wifi extender setup, heed the advice below:

Start by connecting your extender and router using an Ethernet wire.
As soon as the LED light improves, wait.
Then, press and hold the WPS button for 5 seconds.
Both devices’ lights will begin to flicker, and after 15–20 seconds, they will stop, indicating a successful setup.
Now that your new extender has been removed, you can place it wherever you want using a range extender setup.
The password for the new extender setup is the same as the password for your router, and you will then see “SSID_EXT” in your wifi list.